Desktop Semi-Automated Screen Printing Film Coater With Vacuum Chuck
AOT
Xiamen, China
10-25 working days
50 Sets/Month
AOT-EQ-SPC-3050 is a bench-top precision screen printing film coater driven by compressed gas with a coating area of 300 mm x 500 mm. It is a cost-effective tool for making various film coating with patterns and can be used for making flexible rechargeable battery electrodes, OLED, or thermoelectric devices.
AOT-EQ-SPC-3050 is a bench-top precision screen printing film coater driven by compressed gas with a coating area of 300 mm x 500 mm. It is a cost-effective tool for making various film coating with patterns and can be used for making flexible rechargeable battery electrodes, OLED, or thermoelectric devices.
Parameter
Product Model
AOT-EQ-SPC-3050
Features
Two types of operation mode: foot pedal and automatic
Digital display to count printing number
Vacuum chuck for holding the printing sheet faster and easier
The printing knife is driven b compressed gas with constant pressure to ensure repeatable quality printing
Printing length, width, and blade angle are adjustable for quality printing
Working Voltage
208 - 240V Single Phase, 50/60Hz
For 110V, a 100W Transformer can be purchased separately
Substrate Holder
A substrate is held by the vacuum chuck with an area of 300 x 500 mm
The vacuum pump is built into the bottom of the machine
Effective printing area: 280 x 350 mm Max.
Substrate thickness: 0 - 80 mm adjustable
The position of the vacuum chuck can be fine adjusted with the knobs.
Position adjusting range:
X-axis: 10mm to the left and 10mm to the right, total of 20mm
Y-axis: 8mm to the front and 8mm to the back, total of 16mm
Screen Mask Holder
Holds Screen Mask within the below range:
Length: 300 - 600mm
Width: 200 - 350mm
The Y-axis position is adjustable via a lead screw.
Adjustable range: 30mm inward and 30mm outward, a total of 60mm.
Coating Blade
Two Squeegee Holders are included with a coating width of 170mm and 250mm.
Two Squeegee with a width of 170mm and 250mm are also included for immediate use.
The backing blade is used for returning the printing material to achieve automatic continuous printing.
Dimension
With Protective Shield: 840L × 600W × 1070H (mm)
Without Protective Shield: 750L × 500W × 900H (mm)
Net Weight
90 kg
Product display
Desktop Semi-Automated Screen Printing Film Coater With Vacuum Chuck
AOT-EQ-SPC-3050 precision screen printing film coater, pneumatic constant pressure squeegee system, 280x350mm effective printing area, vacuum suction cup compatible with 80mm substrate, special equipment for flexible battery electrode and OLED patterning coating, support digital counting and dual operation mode.
Exhibition
AOT Lithium Battery Equipment exhibition provides exhibitors and visitors with a comprehensive platform for display, exchange, cooperation and trade. By participating in the exhibition, enterprises can understand the industry dynamics, expand market channels, enhance brand image and promote technological innovation and industrial upgrading.
Certificate
Cooperative partners
FAQ
Q1: How to switch between 170mm and 250mm scraper?
A: Loosen the locking bolt of squeegee holder, pull out the old squeegee horizontally and insert the new squeegee (blade angle 45°±2°), reset and calibrate the pneumatic pressure (standard 0.3-0.5MPa) by pressure gauge.
Q2: How to check the insufficient suction force of vacuum suction cup?
A: Check the sealing of the suction cup air circuit, clean the filter (once a month), make sure the negative pressure of the vacuum pump > -80kPa, if still abnormal, replace the silicone sealing strip.
Q3: How to calibrate the printing position accuracy of the equipment?
A: Use the standard positioning scale (included) placed in the center of the suction cup, through the X / Y axis fine-tuning knob to align the screen datum line, repeat three times the positioning error should be <±0.05mm.
Q4: Does the screen printing film coater support ceramic substrate or PI film printing?
A: It is compatible with rigid/flexible substrates with thickness ≤80mm. It is recommended that the air pressure be adjusted to 0.2MPa and the squeegee angle be set to 60° to minimize deformation when printing PI film.
Q5: Does the 110V version require additional equipment?
A: We need to purchase 100W transformer separately (not standard), note that the transformer power should match the maximum load of the equipment (peak 120W) to avoid overload burnout.
